Custom Dining Tables
Custom Dining Room Tables – Classic & Modern Wood Dining and Kitchen Tables
Custom dining room tables, handmade in solid hardwood and built to the size of your room and your family. Choose turned, tapered, flush, or timber legs, add leaves or a matching bench, and pick the wood and finish. Every table is built to order in our Joliet, IL workshop.
Wood Species We Use
Hickory
Ash
Walnut
Hard maple
Quarter sawn white oak
A Custom Dining Room Table Built Around Your Room
Store-bought dining tables come in a handful of standard sizes, so most people end up choosing the one that is closest to right. A custom dining table starts the other way around: with your room, how many people you seat on a normal night, and how many you need to fit at the holidays. We build to the inch, so the table fits the space instead of the space adjusting to the table.
How Big Should Your Dining Table Be?
Allow about 24" of table edge per person, plus room at the ends if you seat people there. For width, 36" is the practical minimum, while 40" to 44" leaves space for serving dishes down the center without crowding place settings. Much wider than 48" and it becomes hard to pass food across the table.
Then check the room. Leave at least 36" between the table edge and the walls or other furniture so chairs can pull out, and 42" to 48" where people need to walk behind seated guests.
| Seats | Table size (W x L) | Minimum room size |
|---|---|---|
| 4 | 36" x 48" to 60" | 9' x 10' |
| 6 | 38" to 40" x 66" to 72" | 9.5' x 12' |
| 8 | 40" to 42" x 84" to 96" | 10' x 14' |
| 10 | 42" to 44" x 102" to 108" | 10' x 15' |
| 12 | 44" x 120" | 10.5' x 16' |
| 14 or more | 44" to 48" x 132" to 144" | 11' x 17' to 18' |
If the room is tight, a narrower table often works better than a shorter one. A 36" wide table can seat the same number of people as a 42" one while giving back several inches of walkway on each side.
Four Legs, Pedestal, or Metal Base?
The base decides how people sit at the table as much as how it looks. A four-leg table is the most traditional and the most stable design: support at every corner, room for a full apron, and a look that suits farmhouse, transitional, and classic dining rooms alike. Its one tradeoff is that the legs sit at the corners, so the end seats need to fall between them.
If you want seats at the corners or more legroom at the ends, look at our pedestal dining tables. For a modern line with slim supports, see our metal base tables. And if you prefer a different shape, browse our round, oval, and square tables.
Leg Styles: Turned, Tapered, Flush, and Timber
- Turned legs are shaped on a lathe into rounded profiles, from simple and transitional to more detailed country styles. A turned leg dining table feels classic and warm, and pairs well with spindle and Windsor-style chairs.
- Tapered legs narrow toward the floor, which makes even a large table look lighter. They suit modern, mid-century, and Shaker-inspired rooms.
- Flush legs sit square and even with the edge of the tabletop for a clean, architectural look. They are the most minimal option and work especially well with a matching bench.
- Timber legs are thick, squared posts with a rustic, lodge feel, best for large farmhouse tables where the table is meant to look substantial.
Details make a difference too. An apron can be straight or arched, a cross brace adds a farmhouse touch, and metal cuffs at the foot of the legs bring in a modern accent. Legs and top do not have to match: an ash top on darker maple legs, for example, gives a two-tone look.
Dining Tables With Leaves
Leaves let a table seat six on a normal night and ten at Thanksgiving. We build dining tables with removable leaves, usually 18" to 20" each, as well as butterfly leaves that fold and store inside the table so they are always on hand. Each leaf adds room for about two more people. Leaves are cut from the same boards as the top whenever possible, so the grain and color stay consistent when the table is extended.
Dining Tables With a Bench
A dining table with a bench on one side seats more people in less space. Benches slide fully under the table when not in use, which opens up a narrow dining room or kitchen, and kids can squeeze in one more. Many clients pair a bench along the wall with chairs on the other side and at the ends. We build benches to the length and height of your table, from the same wood and finish. See our dining benches and custom dining chairs to complete the set.
Choosing the Wood for Your Custom Wood Dining Table
A dining table takes more daily wear than any other furniture in the house, so the wood should suit how you live. Hickory and hard maple are the most dent resistant, a good fit for busy family tables. Quarter sawn oak shows a distinctive ray fleck pattern prized in traditional and craftsman rooms. Ash has a bold, open grain with a lighter tone, and walnut brings rich, naturally dark color without stain.
Counter Height and Game Tables
The same craftsmanship works at other heights and sizes: counter-height dining tables at 36" for kitchens and open-plan spaces, and square game tables sized for four.
Ready to design your handmade dining table? Call our team at 847-401-7753 with your room size and how many people you want to seat, and we will help you plan the right table.
Custom Dining Room Tables FAQ
36" is the practical minimum. 40" to 44" is the most comfortable width, with room for serving dishes in the center. Tables much wider than 48" make it hard to pass food across.
At least 36" between the table and the walls or other furniture, and 42" to 48" where people walk behind seated guests.
Yes. We build tables with removable leaves, usually 18" to 20" each, and butterfly leaves that fold and store inside the table. Each leaf adds room for about two people.
Yes. We build benches to the length and height of your table in the same wood and finish. A bench on one side seats more people in less space and slides under the table when not in use.