Oak is oak, right? Not quite! White oak and red oak are two different groups of trees, and while they look alike at first glance, the differences matter a lot once a finish goes on, and once you see the price tag.
These days, "white oak" is one of the most requested words we hear in our showroom. So let's break down what actually sets white oak and red oak apart: color, hardness, grain, cost, and when white oak is (and is not) worth it.
The Quick Answer
White oak and red oak are very similar in hardness and durability. The biggest differences are color and cost. Red oak has a reddish, pinkish tone that makes some of today's popular finishes hard or impossible to achieve. White oak has a more golden tone that takes the earthy, natural colors people want right now. That is why we build with white oak and do not work with red oak.
Color: Pink vs Golden
This is the big one.
Red oak has a reddish or pinkish tone to it. You may not notice it on a raw board, but once a finish goes on, that warm pink undertone comes through. That makes some of the most popular colors today, like soft natural tones, greige, and light earthy finishes, hard or even impossible to get on red oak.
White oak has more of a golden, tan tone. That warm but neutral base is exactly why the earth tone finishes that are so popular right now work so well on it. Natural, limed, and light brown finishes all look clean and intentional on white oak.
Hardness and Durability: Practically a Tie
Good news if you were worried about durability: both oaks are hard, tough woods that hold up to everyday family life. On the Janka hardness scale (which measures how much force it takes to dent the wood), white oak comes in at about 1,360 and red oak at about 1,290. In the real world, that is a very small difference, and both make durable furniture.
One difference worth knowing: white oak's pores are naturally plugged, which makes it more resistant to moisture. That is the reason white oak has been used for boats and barrels for centuries. Red oak's pores are open, so it is more porous.
Grain: Bold Cathedrals vs Rift Cut Lines
Both oaks have a pronounced, open grain you can see and feel. How the log is cut changes the look completely:
Flat sawn (plain sawn) oak shows the classic "cathedral" arches, the grain pattern most people picture when they think of oak.
Quarter sawn oak shows straighter grain with flecks and ribbons running across the board, called ray fleck.
Rift cut oak is the one everyone is asking for right now. White oak is often rift cut, which makes the grain very straight and linear, a sleeker look that reads almost like morse code down the length of the board. It is a very popular look these days, especially for modern and transitional homes. Take a look at our rift sawn white oak Peru dining table to see it in person.
Curious about the difference between rift and quarter sawn? We cover it in detail in our article on quarter sawn vs rift sawn white oak.
Cost: The Difference Is Bigger Than You Think
Here is where things really split. With demand where it is right now, rift cut white oak, and even flat sawn white oak, costs about five times more than red oak.
Rift cutting adds to that, because cutting a log for that straight, linear grain yields far fewer usable boards. In fact, rift cut white oak is currently the most expensive species we build with, ahead of walnut. Keep in mind that wood is a commodity, so prices move with the market.
The "White Oak" Buzzword Trap
Here is something we see more and more: customers asking for a table in white oak, and then asking for it in a black or painted finish.
We get it. White oak has become a buzzword, and it sounds like the premium choice. But if the finish hides the wood's color completely, you are paying a big premium for a golden tone and grain nobody will see. That kind of defeats the purpose!
If you love a black, painted, or solid color finish, a different species is usually the smarter pick. Hard maple has a tight, smooth grain that takes paint and solid colors beautifully. Ash has a bold grain that still shows through darker stains, so you keep some texture under the color. Save white oak for the natural, earth tone, and light finishes where it really shines.
White Oak vs Red Oak at a Glance
|
White Oak |
Red Oak |
|
|---|---|---|
|
Natural color |
Golden, light tan |
Reddish, pinkish tan |
|
Finish options |
Earth tones, natural, limed, light browns |
Popular natural and greige tones hard or impossible to achieve |
|
Janka hardness (lbf) |
About 1,360 |
About 1,290 |
|
Pores |
Closed, more moisture resistant |
Open, more porous |
|
Popular cut |
Rift cut (linear grain) or quarter sawn |
Mostly flat sawn |
|
Cost today |
About 5 times red oak (rift and flat sawn) |
Lower |
|
Do we build with it? |
Yes |
No |
How to Tell White Oak From Red Oak
Wondering which oak you have? A few quick clues:
Look at the color. Red oak leans pink or reddish, while white oak leans golden or olive-tan.
Check the end grain. Red oak's pores are open and visible, while white oak's pores are plugged and look filled in.
Look at the rays. On quarter sawn boards, white oak's ray flecks are usually longer and more pronounced than red oak's short flecks.
Under a finish, the undertone is often the easiest giveaway: if the wood looks a little pink, it is probably red oak.
Can You Make Red Oak Look Like White Oak?
You can get closer with toners and stains, but it is hard. That pink undertone tends to fight the cool, earthy finishes people want, which is exactly why those colors are so tricky on red oak. If the white oak look is what you are after, starting with white oak is the most reliable way to get it.
White Oak vs Red Oak FAQ
What is the difference between white oak and red oak?
The main differences are color and cost. Red oak has a reddish, pinkish tone, while white oak is more golden and takes earth tone finishes well. Their hardness and durability are very similar, but white oak currently costs much more.
Is white oak harder than red oak?
Slightly. White oak has a Janka hardness of about 1,360 compared to about 1,290 for red oak. In everyday use, both are durable hardwoods and perform very similarly.
Is white oak more expensive than red oak?
Yes. With current demand, rift cut and even flat sawn white oak cost about five times more than red oak. Wood prices move with the market, so the gap can change over time.
Which oak is better for furniture?
Both are durable, but white oak is more versatile for today's popular finishes because its golden tone works with natural and earth tone colors. Red oak's pink undertone makes some of those colors hard or impossible to achieve.
How can you tell white oak from red oak?
Look for color (red oak leans pink, white oak leans golden), check the end grain (red oak pores are open, white oak pores are plugged), and on quarter sawn boards, look for longer ray flecks in white oak.
Should I choose white oak for a black or painted finish?
Usually not. If a solid or very dark finish will hide the wood's natural color, you pay a premium for something you will not see. Hard maple is a great choice for paint and solid colors, and ash works well under dark stains.
Not Sure Which Wood Is Right for You?
Choosing a wood species is one of the biggest decisions in a custom piece, and it is much easier when you can see and touch the options side by side. Come see rift cut white oak next to walnut, hard maple, hickory, and ash at our showroom at 18558 NW Frontage Road in Joliet, Tuesday through Saturday, 8 AM to 4:30 PM.
Have a finish in mind already? Give us a call at 847-401-7753 and we will help you match the right species to the look you want, so you are not paying for something the finish will hide. You can also browse our custom dining tables, read our wood species guide, start designing in the Digital Crafter, or request an estimate.